Installing CD and DVD are same. They both have same connection pins and use the same method to connect.1. Set the jumpers to master or select if unshared data cable is used.2. Connect the IDE data cable to the mother board drive controller.3. Connect the other end of the data cable to the compact disk drive 4. Connect the 4-pin connector from the power supply to the hard drive.5. Connect your audio cable to the compact drive.6. Turn on the computer and test if the compact disk drive works. Your compact disk drive does not need any software or bios settings to work. It should automatically work once you install it properly. You can set the boot sequence in bios only if you need to.
No comments:
Post a Comment